The Seahorse, is a stylish old skool, single fin Longboard.
This board is about forgetting about today’s crazy surfboard designs and getting back to simpler times and shapes.
It has a full template, low rocker and soft rails. Made for endless nose rides and fluid turns. Its low rocker will get you through those hard to make sections and the soft rails are easily re-set to get in the sweet spot. It works well in small to mid-size waves in clean faces. A blast from the past that any Longboard surfer will enjoy in their quiver!
OUTLINE: The traditional outline with wider nose wider chopped square tail makes for that classic 60’s looking board.
ROCKER: With emphasis on trimming and nose riding, the Seahorse has a low rocker through the front and midsection for that trim and speed while driving through sections on the nose. While its flip tail rocker helps pull you back into the pocket for endless time on the nose.
CONTOURS: Subtle yet effective, the deep concave in the nose creates crazy lift while perching on the nose . Its flatter midsection creates speed and trim and the slight rolled Vee through the back half makes for ease of rail to rail transitions to set up for you next trip to the tip.
RT SERIES DECK LAYUP: 2 x 6oz
ART SERIES BOTTOM LAYUP: 1 x 6oz cloth 1 x 4oz Fin Patch
QUAD STRINGER DECK LAYUP: 2 x 6oz 1 x 10oz Volan Deck Patch
QUAD STRIBGER BOTTOM LAYUP: 1 x 6oz cloth 1 x 10oz Volan Fin Patch
PERFORMANCE: This is a great classic style board for those smaller to mid size days where you want to flow , trim , turn and nose ride . A perfect board for any surfer to take their surfing to the next level. Enjoy!
Find out more about Creative Army Designer Josh Constable.
NOTE: rider weight is based on board volume and intermediate rider skill level.
|Length||WIdth||Thick||Volume||Fins (Supplied With Board)||Approx Weight Range|
|9'2''||22 3/4''||2 3/4''||66.15 ltr||9" CA Custom Fin||90kg / 198lb or less|
|9'8''||23 1/8''||3''||76 ltr||10" CA Custom Fin||90kg / 198lb +|
Polyester - PU Construction
Polyester or PU construction uses traditional materials and laminating techniques to produce a strong, reliable surfboard with high quality finishes. All polyester boards are CNC milled from the shapers files and laminated by hand using quality components such as Hexcel fiberglass, Silmar resin and Bennett foam.
|Board Concave||Single to Vee|
|Wave Height||0-3ft Waves|
|Rider Skill Level||Beginner, Intermediate, Advanced|